{ "id": 2462963, "name": "TERRY W. McGREGOR, Plaintiff, v. RUAN LEASING COMPANY, Defendant and Counterplaintiff-Appellee (International Harvester Company, Defendant and Counterdefendant-Appellant)", "name_abbreviation": "McGregor v. Ruan Leasing Co.", "decision_date": "1990-06-15", "docket_number": "No. 1\u201489\u20140601", "first_page": "406", "last_page": "410", "citations": [ { "type": "official", "cite": "200 Ill. App. 3d 406" } ], "court": { "name_abbreviation": "Ill. App. Ct.", "id": 8837, "name": "Illinois Appellate Court" }, "jurisdiction": { "id": 29, "name_long": "Illinois", "name": "Ill." }, "cites_to": [ { "cite": "229 N.E.2d 504", "category": "reporters:state_regional", "reporter": "N.E.2d", "opinion_index": 0 }, { "cite": "37 Ill. 2d 494", "category": "reporters:state", "reporter": "Ill. 2d", "case_ids": [ 2866138 ], "opinion_index": 0, "case_paths": [ "/ill-2d/37/0494-01" ] }, { "cite": "338 N.E.2d 857", "category": "reporters:state_regional", "reporter": "N.E.2d", "year": 1967, "opinion_index": 0 }, { "cite": "62 Ill. 2d 77", "category": "reporters:state", "reporter": "Ill. 2d", "case_ids": [ 2970165 ], "year": 1967, "opinion_index": 0, "case_paths": [ "/ill-2d/62/0077-01" ] } ], "analysis": { "cardinality": 537, "char_count": 9878, "ocr_confidence": 0.748, "pagerank": { "raw": 4.621887471290392e-08, "percentile": 0.28925412253764604 }, "sha256": "cbeb42a8f90337f58b27ad8c189ba8563b5f7e5cc1a2b53f70332587816db9e6", "simhash": "1:fa2768d7c7ce5a36", "word_count": 1575 }, "last_updated": "2023-07-14T19:01:37.473766+00:00", "provenance": { "date_added": "2019-08-29", "source": "Harvard", "batch": "2018" }, "casebody": { "judges": [], "parties": [ "TERRY W. McGREGOR, Plaintiff, v. RUAN LEASING COMPANY, Defendant and Counterplaintiff-Appellee (International Harvester Company, Defendant and Counterdefendant-Appellant)." ], "opinions": [ { "text": "JUSTICE LORENZ\ndelivered the opinion of the court:\nThis appeal follows entry of a directed verdict in favor of Ruan Leasing Company (Ruan) on its counterclaim for indemnity against Navistar International Corporation (Navistar), formerly known as International Harvester Corporation, arising out of a strict products liability action in which Navistar and Ruan were named as defendants.\nWe reverse and remand.\nOn February 9, 1978, Terry W. McGregor fell, injuring his back, when, while exiting from a truck manufactured by Navistar, the top portion of an aluminum handhold or \u201cgrab handle,\u201d used to aid descent from the truck\u2019s cab, became detached because of a missing screw.\nThe grab handle was vertically mounted to the upper portion of the side of the cab, immediately behind the driver\u2019s door, and consisted of upper and lower handholds. The top part of the upper grab handle was attached to the cab by a single screw as was the bottom part of the lower grab handle. The top of the lower grab handle and the bottom of the upper grab handle were fastened by a shared third screw.\nThe truck involved was a 1977 model purchased by Ruan from Navistar. Ruan had leased the truck to Union Carbide Corporation (Union Carbide), pursuant to a vehicle lease and service agreement which obligated Ruan to provide all maintenance.\nMcGregor subsequently filed a two-count complaint, as amended, sounding in products liability against Navistar and Ruan. Count I, against Navistar, alleged the truck was unreasonably dangerous because of \u201cinsufficiencies\u201d respecting the grab handle, the grab handle \u201cretention system,\u201d instructions respecting inspection, repair, maintenance, and service of the grab handle, and the truck\u2019s \u201centry-exit system.\u201d Count II, against Ruan, cited the vehicle lease and service agreement between Ruan and Union Carbide and alleged, in addition to the same insufficiencies above, that the truck was defective because the grab handle was insufficiently attached, was insufficiently \u201ctorqued or tightened,\u201d and was \u201cinsufficiently serviced, repaired, and maintained.\u201d\nIn turn, Ruan filed a counterclaim, as amended, against Navistar for indemnity. Ruan alleged no changes or modifications to the truck\u2019s grab handle had been made between the time the truck was purchased by Ruan from Navistar and the time of McGregor\u2019s injury. Further, Ruan alleged it had serviced and maintained the truck in a manner intended or reasonably foreseen by Navistar.\nThe matter proceeded to trial before a jury with the indemnity aspect severed pending the jury\u2019s determination as to liability on McGregor\u2019s complaint.\nAt trial, testimony was presented that, prior to delivery of the truck to Union Carbide, Ruan caused the truck to be painted by New-Look Auto & Truck Repair (New Look). In conjunction with the painting process, the screw securing the top part of the upper grab handle had been loosened. Testimony regarding that process and its possible effects was provided through the evidence deposition testimony of Donald Paugh, vice-president of New Look, and the trial testimony of Edward C. Caulfield, a mechanical engineer, and John Michael Stilson, a safety and automotive engineering consultant.\nPaugh estimated that the particular truck involved was painted on May 14 or 15, 1977. Paugh testified to having had observed all 33 trucks which had been painted by New Look for Ruan, but stated he did not observe every phase of the painting process. In describing the normal painting process, Paugh stated the lower grab handles were entirely removed in order to paint the truck cabs. That entailed removing the screw which also secured the lower part of the upper grab handle. With respect to the remaining screws securing the top part of the upper grab handle, it was New Look\u2019s policy only to loosen that screw sufficiently to permit the upper grab handle to be rotated upward, away from the area of the cab to be painted, and taped near the roof of the cab. After the painting, the upper grab handle would be rotated into the proper position and both the lower and upper grab handles would be attached by the same screws using a Phillips-head screwdriver. The screws were tightened as tight as they could be by hand. New Look was not given any torque specifications from Navistar or Ruan regarding the required tightness of the screws.\nCaulfield testified as an expert on behalf of Navistar regarding how the loosening of screws might affect the necessary \u201cpreload,\u201d achieved through applying torque, or tightening, to the screws to adequately secure the grab handle. Caulfield testified \u201c9 to 11 foot-pounds\u201d of torque would be in excess of the amount of tightening of the screws necessary to secure the grab handle to sustain the truck operator\u2019s weight and any amount of added weight caused by the operator pulling on the handle. Caulfield acknowledged that a person using a hand-held Phillips-head screwdriver would be able to achieve the proper level of torque to secure the screws. He indicated that an average individual could achieve approximately \u201c100-inch pounds,\u201d or \u201cSVb footpounds,\u201d using such a screw driver. Caulfield also testified that the operator and service manuals for the truck did not set out or recommend the proper torque for the grab handle screws. In reference to the painting process in which the screw securing the top of the grab handle was loosened and, after painting, retightened, Caulfield testified that, if the screw were retightened by hand as tightly as possible, any loss of integrity to the joint by loosening the screw would be restored.\nStilson was qualified as an expert and testified on plaintiff\u2019s behalf as to his opinions concerning alleged defects which might have contributed to the cause of plaintiff\u2019s injury. Stilson determined that the grab handle fastening system was sensitive to road vibrations and that such vibrations could cause a screw to loosen, unwind, and fall out. He based his opinion on several tests he conducted using a body panel of a truck similar to the truck from which plaintiff had fallen. Stilson testified that, in the vibration tests, screws tightened to 9 to 11 footpounds of torque did not completely vibrate out of the body panel.\nAt the close of evidence, the trial judge instructed the jury, pursuant to an Illinois Pattern Jury Instruction, that liability against defendants was premised on one or more of the following defective conditions:\n\u201ca. The grab handle fastener system on the truck was insufficient;\nb. The instructions regarding inspection or torquing of the grab handle fastener system on the truck were insufficient; and\nc. The grab handle was structurally insufficient.\u201d Illinois Pattern Jury Instructions, Civil, No. 400.01 (1968).\nThe jury returned a general verdict in favor of McGregor and against defendants, awarding $750,000 in damages.\nRuan subsequently moved for a directed verdict on its indemnity counterclaim. The trial judge granted Ruan\u2019s motion, observing that, as the action predated the Contribution Act (see Ill. Rev. Stat. 1987, ch. 70, par. 301), Ruan could not be liable in light of a finding pursuant to a theory of strict products liability.\nThis appeal followed.\nOpinion\nNavistar correctly points out that, to be successful in its indemnity action, Ruan must show the defective condition causing Mc-Gregor\u2019s injury existed when the truck left Navistar\u2019s control (see Liberty Mutual Insurance Co. v. Williams Machine & Tool Co. (1975), 62 Ill. 2d 77, 338 N.E.2d 857), and concedes Ruan may rely on McGregor\u2019s proof at trial to do so. Navistar\u2019s argument, essentially, however, is that under the rule announced in Pedrick v. Peoria & Eastern R.R. Co. (1967), 37 Ill. 2d 494, 229 N.E.2d 504, when the evidence is viewed in its aspect most favorable to Navistar, it does not so overwhelmingly favor Ruan as to preclude a contrary verdict.\nWe must agree.\nInitially, we note that inherent in the general verdict rendered, based on the instructions given, is the jury\u2019s determination that an insufficiency existed with regard to the \u201cgrab handle,\u201d the \u201cgrab handle fastener system,\u201d or \u201cthe instructions regarding inspection or torquing of the grab handle fastener system\u201d which constituted a design defect. Logically, we must assume from its finding that the jury also determined Navistar and Ruan each created defects giving rise to liability.\nNevertheless, after reviewing testimony in the record in light of the standard stated in Pedrick, we do not conclude that Ruan was entitled to a directed verdict. Testimony was presented at trial that, after the truck had been delivered by Navistar to Ruan, the cab of the truck had been painted at Ruan\u2019s direction. In the painting process, the particular grab handle screw, the absence of which directly caused McGregor\u2019s injury, was loosened. While certain testimony in the record indicates hand tightening the screw might have been sufficient to secure the grab handle, thereby preserving the integrity of the fastening system, there is no testimony that the particular screw involved was so sufficiently tightened even to that extent. We believe an inference therefore exists that, while in Ruan\u2019s control, the particular screw may not have been adequately tightened after painting by New Look and that that inference must preclude a directed verdict in Ruan\u2019s favor.\nReversed and remanded.\nCOCCIA, P.J., and GORDON, J., concur.", "type": "majority", "author": "JUSTICE LORENZ" } ], "attorneys": [ "Arnstein & Lehr, of Chicago (Louis A. Lehr, Jr., Arthur L. Klein, and John T. Wagener, of counsel), for appellant.", "Rooks, Pitts &' Poust, of Chicago (Terrence J. Madden, of counsel), for appellee." ], "corrections": "", "head_matter": "TERRY W. McGREGOR, Plaintiff, v. RUAN LEASING COMPANY, Defendant and Counterplaintiff-Appellee (International Harvester Company, Defendant and Counterdefendant-Appellant).\nFirst District (5th Division)\nNo. 1\u201489\u20140601\nOpinion filed June 15, 1990.\nRehearing denied August 14, 1990.\nArnstein & Lehr, of Chicago (Louis A. Lehr, Jr., Arthur L. Klein, and John T. Wagener, of counsel), for appellant.\nRooks, Pitts &' Poust, of Chicago (Terrence J. Madden, of counsel), for appellee." }, "file_name": "0406-01", "first_page_order": 428, "last_page_order": 432 }