{ "id": 8525130, "name": "DOUGLAS P. RICH, Plaintiff v. DOUGLAS G. SHAW and DAVID SHAW d/b/a TAYLOR RENTALS, and THE CHARLES MACHINE WORKS, INC., Defendants", "name_abbreviation": "Rich v. Shaw", "decision_date": "1990-05-15", "docket_number": "No. 8926SC1107", "first_page": "489", "last_page": "492", "citations": [ { "type": "official", "cite": "98 N.C. App. 489" } ], "court": { "name_abbreviation": "N.C. Ct. App.", "id": 14983, "name": "North Carolina Court of Appeals" }, "jurisdiction": { "id": 5, "name_long": "North Carolina", "name": "N.C." }, "cites_to": [ { "cite": "276 S.E.2d 325", "category": "reporters:state_regional", "reporter": "S.E.2d", "weight": 2, "year": 1981, "opinion_index": 0 }, { "cite": "302 N.C. 437", "category": "reporters:state", "reporter": "N.C.", "case_ids": [ 8567370 ], "year": 1981, "opinion_index": 0, "case_paths": [ "/nc/302/0437-01" ] }, { "cite": "293 S.E.2d 405", "category": "reporters:state_regional", "reporter": "S.E.2d", "weight": 2, "year": 1982, "opinion_index": 0 }, { "cite": "306 N.C. 435", "category": "reporters:state", "reporter": "N.C.", "case_ids": [ 8571111 ], "year": 1982, "opinion_index": 0, "case_paths": [ "/nc/306/0435-01" ] } ], "analysis": { "cardinality": 427, "char_count": 8543, "ocr_confidence": 0.741, "pagerank": { "raw": 2.473818882993852e-07, "percentile": 0.8068111306875421 }, "sha256": "c4ed7fa97176cf558ed3a4c9d01ecdaa4f29ddc67b5f2d88548a11f19cd9d72b", "simhash": "1:ab1661a87bf3b874", "word_count": 1369 }, "last_updated": "2023-07-14T19:26:07.401162+00:00", "provenance": { "date_added": "2019-08-29", "source": "Harvard", "batch": "2018" }, "casebody": { "judges": [ "Judges Eagles and Greene concur." ], "parties": [ "DOUGLAS P. RICH, Plaintiff v. DOUGLAS G. SHAW and DAVID SHAW d/b/a TAYLOR RENTALS, and THE CHARLES MACHINE WORKS, INC., Defendants" ], "opinions": [ { "text": "WELLS, Judge.\nSummary judgment should be granted when the pleadings, affidavits, and other documents on file show that there is no genuine issue of material fact for trial and that any party is entitled to judgment as a matter of law. N.C. Gen. Stat. \u00a7 1A, Rule 56(c) (1983 & Supp. 1989); Bernick v. Jurden, 306 N.C. 435, 293 S.E.2d 405 (1982). An issue is genuine if it may be maintained by substantial evidence and a fact is material if it would irrevocably establish any material element of a claim or defense. Id. Defendant may meet this burden in one of three ways: (1) proving that an essential element of the plaintiff\u2019s claim is nonexistent, (2) showing that plaintiff cannot produce evidence to support an essential element of his claim, or (3) showing that plaintiff cannot overcome an affirmative defense which bars the claim. Bernick, supra, citing Dickens v. Puryear, 302 N.C. 437, 276 S.E.2d 325 (1981). If defendant satisfies its burden of proof, then the burden shifts to the plaintiff to show that there is a genuine issue for trial. Id.\nIn his complaint, plaintiff asserted various theories of negligence against defendant manufacturer including negligent design based on failure to equip the belt guard with an electrical interlock which would prevent the engine of the machine from operating when the guard was removed. In response to plaintiff\u2019s complaint, defendant manufacturer denied all allegations of negligence and specifically raised the provisions of N.C. Gen. Stat. \u00a7 99B-3 (1989) as a defense to this action. In this case, summary judgment was proper if the provisions of G.S. \u00a7 99R-3' barred recovery by plaintiff as to defendant manufacturer.\nChapter 99B of the North Carolina General Statutes governs product liability actions. G.S. \u00a7 99B-3 specifically addresses circumstances under which a manufacturer of a product will not be held liable in the event a product is altered or modified after leaving the manufacturer\u2019s control. The statute provides:\n(a) No manufacturer ... of a product shall be held liable in any product liability action where a proximate cause of the personal injury, death or damage to property was either an alteration or modification of the product by a party other than the manufacturer . . ., which alteration or modification occurred after the product left the control of such manufacturer . . . unless:\n(1) The alteration or modification was in accordance with the instructions or specifications of such manufacturer . . .; or\n(2) The alteration or modification was made with the express consent of such manufacturer. . . .\n(b) For the purposes of this section, alteration or modification includes changes in the design, formula, function, or use of the product from that originally designed, tested, or intended by the manufacturer. It includes failure to observe routine care and maintenance, but does not include ordinary wear and tear.\nG.S. \u00a7 99B-3.\nDefendant manufacturer submitted an affidavit stating that all of its C99 trenching machines were manufactured and assembled with a belt guard and that these trenching machines have always been sold and shipped to a distributor with belt guards firmly bolted in place. Defendant manufacturer\u2019s affidavit also stated that the operator\u2019s manual furnished to dealers contains safety warnings against removing the belt guard while a trencher is running and cautioning that the belt guard be replaced after removal for any maintenance. A copy of this manual was exhibited with the affidavit.\nThe president of Ditch Witch of Charlotte, Inc. also submitted an affidavit on defendant\u2019s behalf. According to the affidavit, two trenchers were sold by Ditch Witch of Charlotte, Inc. to Taylor Rental Center. The affidavit states that the belt guard was in place and bolted to each machine when they were sold. This forecast of evidence shows that the belt guard was in place when it left the manufacturer\u2019s control. Failure to replace the belt guard after removing it for maintenance or any other reason was not in accordance with defendant manufacturer\u2019s instructions. In fact, defendant manufacturer warned against such operating practices.\nIn order to overcome this forecast of evidence, plaintiff must demonstrate that there was a genuine issue for trial with regard to whether the removal of the belt guard occurred before the trenching machine left the manufacturer. Plaintiff did not present any evidence to show that the belt guard was not in place when it left the manufacturer\u2019s control. His evidence tended to show only that when he picked up the trencher at Taylor Rentals the belt guard was not attached to the machine. By his own deposition testimony plaintiff admits that had the belt guard not been removed, his hand would not have been pulled into the machine.\nWhen, as here, the forecast of evidence demonstrates that a proximate cause of plaintiff\u2019s injury was the modification or alteration of the machine by a party other than the manufacturer after it left the control of the manufacturer; and that the alteration of the machine was contrary to the instructions of the manufacturer and done without its express consent, then G.S. \u00a7 99B-3 bars recovery from the manufacturer. The trial court\u2019s grant of summary judgment was therefore proper in this case.\nAffirmed.\nJudges Eagles and Greene concur.", "type": "majority", "author": "WELLS, Judge." } ], "attorneys": [ "Smith and Feerick, by Richard T. Feerick, for plaintiff-appellant.", "Golding, Meekins, Holden, Cosper & Stiles, by John G. Golding, for defendant-appellee The Charles Machine Works, Inc." ], "corrections": "", "head_matter": "DOUGLAS P. RICH, Plaintiff v. DOUGLAS G. SHAW and DAVID SHAW d/b/a TAYLOR RENTALS, and THE CHARLES MACHINE WORKS, INC., Defendants\nNo. 8926SC1107\n(Filed 15 May 1990)\nSales \u00a7 22 (NCI3d)\u2014 product liability \u2014 belt guard removed from machine \u2014 proximate cause of injury \u2014 manufacturer not liable\nN.C.G.S. \u00a7 99B-3 bars recovery from the manufacturer in a product liability action where the forecast of evidence shows that a proximate cause of plaintiffs injury was the modification or alteration of a machine by a party other than the manufacturer after it left the manufacturer\u2019s control and that the alteration was contrary to the manufacturer\u2019s instructions and done without its express consent. Therefore, in an action to recover for injuries received when plaintiff\u2019s hand was pulled into the belts and pulleys of a rented trenching machine manufactured by defendant while plaintiff was working on the machine, summary judgment was properly entered for defendant manufacturer where plaintiff\u2019s forecast of evidence showed that a belt guard which would have prevented his injury was missing from the trencher when he rented it from a third party; defendant manufacturer\u2019s forecast of evidence showed that the belt guard was in place when the trencher left the manufacturer\u2019s control and that the operator\u2019s manual furnished by the manufacturer warned against operation of the trencher without the belt guard and cautioned that the belt guard should be replaced after removal for maintenance; and plaintiff failed to present evidence that the belt guard was not in place when the trencher left the manufacturer\u2019s control.\nAm Jur 2d, Products Liability \u00a7\u00a7 354, 367.\nAPPEAL by plaintiff from order entered 21 July 1989 in MECKLENBURG County Superior Court by Judge Frank W. Snepp. Heard in the Court of Appeals 11 April 1990.\nIn this product liability action plaintiff seeks damages for an injury he received while operating a Ditch Witch C99 trenching machine. The trencher, manufactured by defendant The Charles Machine Works, Inc., was rented by plaintiff from defendants Douglas and David Shaw d/b/a Taylor Rentals.\nWhen plaintiff rented the trencher from Taylor Rentals he noticed that the belt guard, also referred to as a safety guard, was missing. The purpose of the belt guard is to protect the operator of the trencher by preventing the operator from inserting hands or other body parts into the belts, chains, or gears of the machine. When plaintiff started to use the machine, he noticed that the rear wheels of the trencher were not pulling and that the digging chain was not engaged. In an attempt to fix the trencher plaintiff knelt down and, without turning off the motor, tried to adjust two levers located in the trencher. While plaintiff was working on the trencher with his left hand, his right hand was somehow pulled into the belts and over the pulleys. As a result his hand was seriously injured.\nSummary judgment was granted in favor of defendant manufacturer based on N.C. Gen. Stat. \u00a7 99B-3. Plaintiff appeals.\nSmith and Feerick, by Richard T. Feerick, for plaintiff-appellant.\nGolding, Meekins, Holden, Cosper & Stiles, by John G. Golding, for defendant-appellee The Charles Machine Works, Inc." }, "file_name": "0489-01", "first_page_order": 517, "last_page_order": 520 }